Your cart is empty

HY-STM32F429IG Development Board

US $70.00
Always Free Shipping
  • Model: HY-STM32F429IG
  • Shipping Weight: 105g
  • 98 Units in Stock

 Description

The HY-STM32F429IG development board is a full-featured evaluation platform based on ST STM32F429IGT6 which is an ARM Cortex-M4 microcontroller for embedded applications featuring a high level of integration and low power consumption at frequencies of 180 MHz with 1 MB of flash memory, 256 KB of data memory, Ethernet, USB 2.0 Host/OTG/Device, 16-channel DMA controller, 4 UARTs, 2 CAN channels, 6 SSP/SPI, 3 I2C, I2S/SAI, 12-bit ADC, 12-bit DAC, camera, LCD controller, SD/MMC interface, motor control PWM, 17 general purpose timers, 4-output general purpose PWM, ultra-low power Real-Time Clock with separate battery supply, and up to 168 general purpose I/O pins.

The HY-STM32F429IG development board takes full features of the ST STM32F429IGT6 ARM Cortex-M4 microcontroller and exposes many peripherals including UARTs, USB, Ethernet, CAN, RS485, Audio, LCD and JTAG. The board has external 32MB SDRAM, 4MB SRAM, 8MB Nor Flash, 128MB Nand flash, 256KB EEPROM and 4MB SPI Flash to enhance the memory capabilities. The HY-STM32F429IG board is provided with plenty of MDK-ARM source code and detailed document as well as some necessary cable accessories to help users evaluate, learning and make prototype based on ST STM32F429IGT6 ARM Cortex-M4 processor at a fast period.

HY-STM32F429IG contains CM-STM32F4XXIG and SOM-STM32F429IG, SOM-STM32F429IG is OSHW and PCB files are available for study, learn, modification, re-production.

CM-STM32F4XXIG is System on Chip module, which contains 180 MHz Cortex-M4 STM32F429IGT6 microcontroller with 32MB SDRAM, 4MB SRAM, 8MB NOR Flash and a 128MB Nand flash on a single board. The SOM interfaces to a baseboard (motherboard) using two 50-pin interface connectors.

CM-STM32F4XXIG Features

  • Processor: ST STM32F429IGT6, ARM Cortex-M4 Microcontroller, working at 180MHz
  • - 256 KB SRAM for code and data use
  • - 1 MB ROM containing boot code and on-chip software drivers
  • 32MB SDRAM
  • 4MB SRAM
  • 8MB NOR
  • 128MB Nand Flash
  • One Power indicator
  • One user LED
  • 32.768 kHz crystal for Real Time Clock.
  • Connector: 2 connectors x 50pin 2.0mm pitch.
  • Dimensions: 50mm x 40 mm

  1. STM32F429IGT6, ARM Cortex-M4 Microcontroller
  2. 128MB Nand Flash
  3. user LED
  4. Power indicator
  5. 32MB SDRAM
  6. 4MB SRAM + 8MB NOR
  7. 32.768 kHz crystal

SOM-STM32F429IG is evaluation board based on CM-STM32F4XXIG module and is routed on 2 layers only, reference design for SOM-STM32F429IG with USART, USB, LCD, Audio In/Out, 10/100M Ethernet, USB 2.0 Host/Device, it is available with PADS9.5, Protel99SE, AD, PCB files, so everyone can modify and tailor to his needs.

SOM-STM32F429IG Features

  • 1 x Micro USB Debug port(USB to USART1 with CP2102)
  • 1 x Serial port (reused with USART1)
  • 1 x RS485 (USART6)
  • 1 x Hi-speed USB HOST
  • 1 x Micro USB Device
  • 1 x Ethernet interface
  • 2 x CAN interfaces
  • 1 x Micro SD card slot
  • 20-pin JTAG interface
  • Stero audio output port
  • MIC input (No welding Microphones)
  • 4MB SPI Data Flash
  • 256K EEPROM
  • On-board programming and debugging
  • LCD with resistance touch screen
    - Hardware is not compatible capacitance, see here.
    - Support 16-bit true color, resolution up to 1024 x 768 pixels
    - 4.3" LCD Module with resolution 480 x 272 pixels,
    HY43-LCD, recommend the whole package in here.
    - 5" LCD Module with resolution 480 x 272 pixels,
    HY5-LCD, recommend the whole package in here.
    - 5" LCD Module with resolution 800 x 480 pixels,
    HY5-LCD-HD, recommend the whole package in here.
    - 7" LCD Module with resolution 800 x 480 pixels,
    HY7-LCD, recommend the whole package in here.
    - 4-wire resistive touch screen
  • LCD with capacitance touch screen
    - Hardware is not compatible with resistance, see here.
    - Support 16-bit true color, resolution up to 1024 x 768 pixels
    - 5" LCD Module with resolution 800 x 480 pixels,
    HY050CTP-HD, recommend the whole package in here.
    - 7" LCD Module with resolution 800 x 480 pixels,
    HY070CTP, recommend the whole package in here.
    - 7" LCD Module with resolution 1024 x 600 pixels,
    HY070CTP-HD, recommend the whole package in here.
    - 10.1" LCD Module with resolution 1024 x 600 pixels,
    HY101CTP, recommend the whole package in here.
    - FT5x06 capacitance touch screen controller

  1. Serial RS-232 USART (USART1)
  2. On-board programming debugging status indicators
  3. 20-pin ARM JTAG interface
  4. 8 bit bus interface expansion port
  5. Varistor for ADC input
  6. 2 x User LEDs
  7. Power indicator LED
  8. 2 x User Keys
  9. ISP Key
  10. Reset Key
  11. 10/100M RJ45 Ethernet
  12. Stero audio output port
  13. LCD connector support 16-bit true color, RGB interface. resistance and capacitance touch screen is not compatible, see here.
  14. MIC input (No welding Microphones)
  15. Power supply 5V/1A input, 5.2mm(ext. diameter) x 2.1mm (int. diameter) barrel plug
  16. USB Host port
  17. USB Client port (micro)
  18. CR1220 RTC Battery Holder
  19. RS485 (USART6)
  20. CAN1
  21. CAN2
  22. Micro-SD slot
  23. Micro USB Debug port(USB to USART1 with CP2102)
  24. On-board programming USB Client port (micro)

Shipping List

  • 1 x HY-STM32F429IG Development Board

Documents


Add to Cart: