Beagleong Black LCD Display with Stereo Audio Cape

From wiki
(Difference between revisions)
Jump to: navigation, search
(Audio test)
(Audio test)
Line 38: Line 38:
  
 
==== Audio test ====
 
==== Audio test ====
Start terminal, then use command mplayer to test.
+
Start terminal, use command alsamixer to adjust the volume, default is lower volume.
# mplayer FILENAME //such as: mplayer ~/marsboard/Music/AudioTest.aac
+
 
 +
then use command mplayer to test.
 +
 
 +
# mplayer FILENAME //such as: mplayer ~/marsboard/Music/AudioTest.aac

Revision as of 08:11, 7 February 2015

Contents

Before you start

Using the prebuilt image we provided to test hardware.

How to make a bootable SD card

1. Insert the SD card into your computer, if using virtual machines, please make sure the SD card mounted to the Linux operating system.

2. Confirm the SD card mount point “/dev/sdX”, usually it should be “/dev/sdb”. You can use this command to find out what the “X” is in the Linux system.

$ sudo fdisk –l

3. Copy the file “prebuilt-angstrom-bbb-lcd-audio-exif-2014-12-25.tar.gz“ somewhere(such as $HOME).

4. Extract the file “prebuilt-angstrom-bbb-lcd-audio-exif-2014-12-25.tar.gz“

$ tar xzvf prebuilt-angstrom-bbb-lcd-audio-exif-2014-12-25.tar.gz

5. Go to the folder “prebuilt-angstrom-bbb-lcd-audio-exif-2014-12-25“

$ cd ~/prebuilt-angstrom-bbb-lcd-audio-exif-2014-12-25

6. Flash the Angstrom OS to the SD card

$ sudo ./mksdcard.sh --device /dev/sd<?>

Notes: The SD card should be at least 2GB, and you’d better to use Sandisk Class4 level SD card or or above.

Start the Angstrom OS

1. Insert SD card into BeagleBoneBlack.

2. Power on the board.

Tests

Touch screen

Click on the screen, the mouse arrow stays in position triggered.

Audio test

Start terminal, use command alsamixer to adjust the volume, default is lower volume.

then use command mplayer to test.

# mplayer FILENAME //such as: mplayer ~/marsboard/Music/AudioTest.aac
Personal tools