HDMI/VGA/AV RTD2660H Video Converter Board

From wiki
(Difference between revisions)
Jump to: navigation, search
Line 1: Line 1:
 
== RTD2660H Driver Board  ==
 
== RTD2660H Driver Board  ==
  
This is display driver board. It has multiple inputs and works well with both TTL and LVDS screens. This driver even has HDMI audio support and can drive two 4 ohm speakers directly. This driver has a scaler built in. That means you can use it to drive an 800x480 display but set the computer to output 1280x800 and it will scale the display down. However, the image will be stretched out (distorted) if the aspect ratio of the scaler doesn't match up. For example, if you have an 800x480 display, the aspect ratio is 1.6 so 1280x720 would look stretched out (1.77 ratio) but 1280x800 would probably look OK (1.66 ratio).  
+
This is display driver board. It has multiple inputs and works well with both TTL and LVDS screens. This driver even has HDMI audio support and can drive two 4 ohm speakers directly. This driver has a scaler built in. That means you can use it to drive an 800x480 display but set the computer to output 1280x800 and it will scale the display down. However, the image will be stretched out (distorted) if the aspect ratio of the scaler doesn't match up. For example, if you have an 800x480 display, the aspect ratio is 1.6 so 1280x720 would look stretched out (1.77 ratio) but 1280x800 would probably look OK (1.66 ratio).
  
 
== Pin Assignment  ==
 
== Pin Assignment  ==

Revision as of 02:08, 23 March 2016

Contents

RTD2660H Driver Board

This is display driver board. It has multiple inputs and works well with both TTL and LVDS screens. This driver even has HDMI audio support and can drive two 4 ohm speakers directly. This driver has a scaler built in. That means you can use it to drive an 800x480 display but set the computer to output 1280x800 and it will scale the display down. However, the image will be stretched out (distorted) if the aspect ratio of the scaler doesn't match up. For example, if you have an 800x480 display, the aspect ratio is 1.6 so 1280x720 would look stretched out (1.77 ratio) but 1280x800 would probably look OK (1.66 ratio).

Pin Assignment

RGB Pin Assignment

PIN NO Symbol I/O Function
1
BLVDD
Power
Backlight power supply connect 5V
2 BLVDD
Power
Backlight power supply connect 5V
3 GND
Power
Power ground
4
VDD
Power
Power supply voltage connect 3.3V
5
R0
Input
Red data (LSB)
6
R1
Input
Red data
7
R2
Input
Red data
8
R3
Input
Red data
9
R4
Input
Red data
10
R5
Input
Red data
11
R6
Input
Red data
12
R7
Input
Red data (MSB)
13
G0
Input
Green data (LSB)
14
G1
Input
Green data
15
G2
Input
Green data
16 G3
Input
Green data
17
G4
Input
Green data
18
G5
Input
Green data
19
G6
Input
Green data
20
G7
Input
Green data (MSB)
21
B0
Input
Blue data (LSB)
22
B1
Input
Blue data
23
B2
Input
Blue data
24 B3
Input
Blue data
25 B4
Input
Blue data
26
B5
Input
Blue data
27
B6
Input
Blue data
28
B7
Input
Blue data (MSB)
29
GND
Power
Power ground
30
PCLK
Input
Pixel clock
31
LCD-BL-EN
Input
LCD backlight on/off, On=1; Off = 0;
32
HSYNC
Input
Horizontal Sync Signal
33
VSYNC
Input
Vertical Sync Signal
34
DE
Input
Data Enable
35
LCD-BL-ADJ
Input
LCD backlight Control (PWM control)
36
GND
Power
Power ground
37
CTP-SDA
Input/Output
CTP I2C SDA
38
CTP-SCL
Input
CTP I2C SCL
39
CTP-RST
Input
CTP Reset input
40
CTP-INT
Output
CTP Interrupt output

LVDS Pin Assignment

PIN NO Symbol I/O Function
1
BL3-VDD_5V
Power
Backlight power supply connect 5V
2 BL2-VDD_5V
Power
Backlight power supply connect 5V
3 BL1-VDD_5V
Power
Backlight power supply connect 5V
4
NC

No Connector
5
LCD-BL-EN
Input
LCD backlight on/off, On=1;Off = 0;
6
LCD-BL-ADJ
Input
LCD PWM backlight control
7
NC

No Connector
8
BL3-GND
Power
Backlight Power ground
9
BL2-GND
Power
Backlight Power ground
10
BL1-GND
Power
Backlight Power ground
11
CTP-RST
Input
CTP reset input
12
CTP-INT
Output
CTP interrupt output
13
GND7
Power
Power ground
14
NC

No Connector
15
NC

No Connector
16 GND6
Input
Power ground
17
NC

No Connector
18
NC

No Connector
19
GND5
Power
Power ground
20
LVDS-D3P
Input
LVDS differential data input
21
LVDS-D3N
Input
LVDS differential data input
22
GND4
Power
Power ground
23
LVDS-CLKP
Input
LVDS differential clock input
24 LVDS-CLKN
Input
LVDS differential clock input
25 GND3
Power
Power ground
26
LVDS-D2P
Input
LVDS differential data input
27
LVDS-D2N
Input
LVDS differential data input
28
GND2
Power
Power ground
29
LVDS-D1P
Input
LVDS differential data input
30
LVDS-D1N
Input
LVDS differential data input
31
GND1
Power
Power ground
32
LVDS-D0P
Input
LVDS differential data input
33
LVDS-D0N
Input
LVDS differential data input
34
CTP-SDA
Input/Output
CTP I2C SDA
35
CTP-SCL
Input
CTP I2C SCL
36
NC

No Connector
37
VDD3
Power
Power voltage connect 3.3V
38
VDD2
Power
Power voltage connect 3.3V
39
VDD1
Power
Power voltage connect 3.3V
40
NC

No Connector

Menu Options

Each driver board comes with a few menues of customizable settings. We go through each below, with some helpful pictures, to show you what you're able to easily control!

[[HDMI/VGA/AV RTD2660H Video Converter Board/wiki/File:RTD2660-keypad.jpg|/wiki/File:RTD2660-keypad.jpg[[Image:]]]]

The keypad buttons help you navigate the display menus and sub-menus. As shown in the picture above:


Source key, When you first start up, you can use the key to select the input source!

Right key is Volume add, when click source key, right key is DOWN

Right key is Volume reduce,when click source key, left key is UP

Menu key is SELECT (brings you to the next menu or option)

when use Menu key, Source key is BACK

Power key, you can open or down the display

Color Menu

[[HDMI/VGA/AV RTD2660H Video Converter Board/wiki/File:Color.jpg|/wiki/File:Color.jpg[[Image:]]]]

Brightness - Adjust the brightness

Contrast - Adjust the contrast

Saturation - Adjust the saturation

OSD - On-screen Display

[[HDMI/VGA/AV RTD2660H Video Converter Board/wiki/File:OSD.jpg|/wiki/File:OSD.jpg[[Image:]]]]

Language - There are a full range of language options for your display. They are:

English, French, Italian, Mandarin, Cantonese, German, Spanish, Japanese, Korean, and Russian


H Position - Horizontal Position

V Position - Vertical Position

OSD Timeout - Adjust the time for the display to go black

Transparent - Adjust the menu's transparency against the background image

Function

[[HDMI/VGA/AV RTD2660H Video Converter Board/wiki/File:Funtion.jpg|/wiki/File:Funtion.jpg[[Image:]]]]

Reset - Reset the settings to default

Display Ratio -

16:9 - similar to the screen's default setting, does not stretch image

Auto

4:3 - compresses image to 4:3 - does not cut off the image! See below for 4:3 ratio

Sleep - this will completely shut off the screen at the end of the set time (0-120 minutes)

Blue Screen - On/Off - This changes the color of the screen on start up when you choose your input

Sharpness - Adjust the sharpness from 0 to 100

Function

[[HDMI/VGA/AV RTD2660H Video Converter Board/wiki/File:Sound.jpg|/wiki/File:Sound.jpg[[Image:]]]]

Volume - Adjust the Sound Volume from 0 to 100


How to enter Upgrade mode

powered off the board , simply press and hold the POWER key, The board will turn on a Blink LED and will stay on Upgrade mode, connect the Micro USB cable to your PC. the computer recognize two USB device, call Video, USB Touch.

Video - video firmware for upgrade, video LVDS firmware and video TTL firmware cannot be working simultaneously, which means only one firmware can be selected at a time. Firmware download from <a rel="nofollow" class="external text" href="http://www.haoyuelectronics.com/service/RTD2660H-Driver-Board">here</a>.

USB Touch - USB HID protocol for touch control ( capacitive touch ), different firmware, support for different LCD modules. Firmware download from <a rel="nofollow" class="external text" href="http://www.haoyuelectronics.com/service/RTD2660H-Driver-Board">here</a>.


[[HDMI/VGA/AV RTD2660H Video Converter Board/wiki/File:Upgrade-video-1.png|/wiki/File:Upgrade-video-1.png[[Image:]]]]

[[HDMI/VGA/AV RTD2660H Video Converter Board/wiki/File:Upgrade-video-2.png|/wiki/File:Upgrade-video-2.png[[Image:]]]]

[[HDMI/VGA/AV RTD2660H Video Converter Board/wiki/File:Upgrade-video-3.png|/wiki/File:Upgrade-video-3.png[[Image:]]]]







<link rel="stylesheet" type="text/css" href="chrome://s3gt/skin/s3gt_tooltip.css"></link>



Personal tools