MarsBoard V1.3

From wiki
Jump to: navigation, search
MarsBoard V1.3
Marsboard upper.jpg
Manufacturer HAOYU Electronics
Dimensions 80mm x 55mm
Website www.marsboard.com
Specifications
SoC A10 @ 1Ghz
DRAM 1GB DDR3
NAND 4GB
Power 5V 2A 4.0mm/1.7mm barrel plug
Features
Video Mini HDMI 1.3
Audio HDMI + 3.5mm plug analog audio output
Network 10/100
Storage 4GB Flash + SD card slot for up to 32GB + SATA port
USB (Host/OTG) 2 x USB 2.0 Host, 1 x USB 2.0 OTG
External Headers

2*70p, including:

  • i2c (twi)
  • spi
  • rgb/lvds
  • csi/ts
  • fm-in
  • adc
  • jtag
  • ctp
  • IRDA
  • cvbs
  • vga
  • spdif-out
  • touch-panel

MarsBoard is a small (80mm x 55mm), hacker friendly, extendable and very low-cost while powerful ARM board with Allwinner A10 SoC.

Contents

Getting started

See the section MarsBoard/FirstSteps for more details on getting started with the MarsBoard.

The marsboard with a pre-installed buildroot image, see Buildroot to rebuild it and possibly apply your customizaions. See Building on Debian for more detailed instructions on building images.

The pre-installed image is for testing only. If you have a HDMI screen or TV that can handle 720p you can see diagnostic output when you power on the board.


Feature

Note marsboard 1.jpg

  1. AllWinner A10 ARM Cortex A8 CPU @ 1GHz + Mali-400 GPU
  2. Recover Key
  3. 4GB Nand Flash
  4. 2.00MM Power Socket
  5. Mini HDMI 1.3 socket
  6. SATA 2.0 socket
  7. mrcro SD card (TF card)socket
  8. 1GB DDR3 SDRAM
  9. USB 2.0 OTG
  10. 2 x USB 2.0 Host
  11. RJ45 Ethernet

Note marsboard 2.jpg

  1. P1, expansion 70 pin 2.0mm spaced headers
  2. Ethernet PHY chip
  3. P2, expansion 70 pin 2.0mm spaced headers
  4. 3.5mm plugs Analog Audio output

Expansion ports

MarsBoard V1.3

Two 2x70 2.0mm male headers.

P1
LCD
1 Ground 2 PD0 (LCDD0/LVDSP0)
3 PD1 (LCDD1/LVDS0N0) 4 PD2 (LCDD2/LVDS0P1)
5 PD3 (LCDD3/LVDS0N1) 6 PD4 (LCDD4/LNVS0P2)
7 PD5 (LCDD5/LVDS0N2) 8 PD6 (LCDD6/LVDS0PC)
9 PD7 (LCDD7/LVDS0NC) 10 Ground
11 PD8 (LCDD8/LVDS0P3) 12 PD9 (LCDD9/LVDS0N3)
13 PD10 (LCDD10/LVDS1P0) 14 PD11 (LCDD11/LVDS1N0)
15 PD12 (LCDD12/LVDS1P1) 16 PD13 (LCDD13/LVDS1N1)
17 PD14 (LCDD14/LVDS1P2) 18 PD15 (LCDD15/LVDS1N2)
19 Ground 20 PD16 (LCDD16/LVDS1PC)
21 PD17 (LCDD17/LVDS1NC) 22 PD18 (LCDD18/LVDS1P3)
23 PD19 (LCDD19/LVDS1N3) 24 PD20 (LCDD20)
25 PD21 (LCDD21) 26 PD22 (LCDD22)
27 PD23 (LCDD23) 28 PD27 (LCDVSYNC)-VGA-HSYNC
29 PD26 (LCDHSYNC)-VGA-VSYNC 30 PD24 (LCDCLK)
31 PD25 (LCD0-DE) 32 PB2 (PWM0)
33 PH8 (LCD0-PWR) 34 PH7 (LCD0-BL-EN)
35 VCC-5V 36 Ground
37 VCC-3V3 38 XP_TP (TP-X1)
39 XN_TP (TP-X2) 40 YP_TP (TP-Y1)
41 YN_TP (TP-Y2) 42 Ground
Power
43 VCC-5V 44 CSI-IO-2V8
CSI0 & TWI1
45 PH16 (CSI0-PWR) 46 PH13 (CSI0-RST#)
47 PB18 (TWI1-SCK) 48 PB19 (TWI1-SDA)
49 PE0 (CSI0-PCLK) 50 PE1 (CSI0-MCLK)
51 PE2 (CSI0-HSYNC) 52 PE3 (CSI0-VSYNC)
53 PE4 (CSI0-D0) 54 PE5 (CSI0-D1)
55 PE6 (CSI0-D2) 56 PE7 (CSI0-D3)
57 PE8 (CSI0-D4) 58 PE9 (CSI0-D5)
59 PE10 (CSI0-D6) 60 PE11 (CSI0-D7)
Power
61 VCC-3V3 62 Ground
SPI0
63 PI11 (SPI0-SCK) 64 PI10 (SPI0-CS)
65 PI13 (SPI0-MISO) 66 PI12 (SPI0-MOSI)
PS2 TWI0
67 PI14 (PS2-SCK) 68 PB0 (TWI0-SCK)
69 PI15 (PS2-SDA) 70 PB1 (TWI0-SDA)
P2
CSI1
1 VCC-5V 2 CSI-IO-2V8
3 PH15 (CSI1-PWR/EINT15) 4 PH14 (CSI1-RST#/EINT14)
5 PG0 (CSI1-PCLK/SDC1-CMD) 6 PG1 (CSI1-MCLK/SDC1-CLK)
7 PG2 (CSI1-HSYNC/SDC1-D0) 8 PG3 (CSI1-VSYNC/SDC1-D1)
9 PG4 (CSI1-D0/SDC1-D2) 10 PG5 (CSI1-D1/SDC1-D3)
11 PG6 (CSI1-D2/UART3-TX) 12 PG7 (CSI1-D3/UART3-RX)
13 PG8 (CSI1-D4/UART3-RTS) 14 PG9 (CSI1-D5/UART3-CTS)
15 PG10 (CSI1-D6/UART4-TX) 16 PG11 (CSI1-D7/UART4-RX)
SDIO3
17 VCC-3V3 18 Ground
19 PH0 (SD3-DET#) 20 PI4 (SDC3-CMD)
21 PI5 (SDC3-CLK) 22 PI6 (SDC3-D0)
23 PI7 (SDC3-D1) 24 PI8 (SDC3-D2)
25 PI9 (SDC3-D3) 26 Ground
SPI1
27 PI16 (SPI1-CS) 28 PI17 (SPI1-SCK)
29 PI19 (SPI1-MISO) 30 PI18 (SPI1-MOSI)
SPI2
31 PC19 (SPI2-CS) 32 PC20 (SPI2-SCK)
33 PC22 (SPI2-MISO) 34 PC21 (SPI2-MOSI)
Power
35 Ground 36 VCC-3V3
CTP
37 PH9 (CTP-INT) 38 PB20 (TWI2-SCK)
39 PH10 (CTP-WAKEUP) 40 PB21 (TWI2-SDA)
IRDA
41 PB4 (IR-RX) 42 Ground
GPIO
43 PH20 (PH20) 44 PH21 (PH21)
45 PH22 (PH22) 46 PH23 (PH23)
47 PH24 (PH24) 48 PH25 (PH25)
ADC0,1
49 AVCC 50 LRADC0 (LRADC0)
51 Ground 52 LRADC1 (LRADC1)
CVBS LINEIN
53 VCC-3V3 54 LINEINL (LINEINL)
55 CVBS (CVBS) 56 LINEINR (LINEINR)
VGA
57 Ground 58 VGA-R (VGA-R)
59 VGA-G (VGA-G) 60 VGA-B (VGA-B)
61 PH27 (LCD1_VSYNC) 62 PH26 (LCD1_HSYNC)
Power
63 VCC-3V3 64 Ground
UART0
65 PB23 (UART0-RX) 66 PB22 (UART0-TX)
JTAG
67 PB14 (JTAG-MS) 68 PB15 (JTAG-CK)
69 PB16 (JTAG-DO) 70 PB17 (JTAG-DI)

Debugging

  • you can use UART0 connect with serial TTL module, like CP2102, PL2303.
serial TTL module Pin on MarsBoard
TTL(RX) PB22(UART0-TX)
TTL(TX) PB23(UART0-RX)
GROUND GND

Package List

Note marsboard 3.jpg

  1. USB to POWER cable
  2. MarsBoard
  3. SATA cable
  4. MINI USB to USB host cable
Personal tools