HDMI/VGA/AV RTD2660H Video Converter Board

From wiki
(Difference between revisions)
Jump to: navigation, search
Line 66: Line 66:
 
Or use this ready-to-go stereo speaker set, you can just plug the connector in
 
Or use this ready-to-go stereo speaker set, you can just plug the connector in
 
directly! (http://adafru.it/1669)
 
directly! (http://adafru.it/1669)
 +
 +
 +
 +
How to enter Upgrade mode
 +
 +
powered off the board , simply press and hold the POWER key, The board will turn on a Blink LED and will stay on Upgrade mode,  connect the USB OTG cable to your PC

Revision as of 09:42, 8 March 2016

RTD2660H Driver Board

This is our display driver board. It has multiple inputs and works well with both TTL and LVDS screens. It have an audio output. This driver has a scaler built in. That means you can use it to drive an 800x480 display but set the computer to output 1280x800 and it will scale the display down. However, the image will be stretched out (distorted) if the aspect ratio of the scaler doesn't match up. For example, if you have an 800x480 display, the aspect ratio is 1.6 so 1280x720 would look stretched out (1.77 ratio) but 1280x800 would probably look OK (1.66 ratio)

The VGA, Power and A/V inputs,


Menu Options

Each driver board comes with a few menues of customizable settings. We go through each below, with some helpful pictures, to show you what you're able to easily control!

The keypad buttons help you navigate the display menus and sub-menus. As shown in the picture above:

source key, When you first start up, you can use the Auto/Back key to select the input source!

right key is Volume add, when click source key, right key is DOWN right key is Volume reduce,when click source key, left key is UP MENU key is SELECT (brings you to the next menu or option) AUTO key is BACK Power key, you can open the display


Color Menu Brightness - Adjust the brightness Contrast - Adjust the contrast Saturation - Adjust the saturation


OSD - On-screen Display Language - There are a full range of language options for your display. They are: English, French, Italian, Mandarin, Cantonese, German, Spanish, Japanese, Korean, and Russian H Position - Horizontal Position V Position - Vertical Position OSD Timeout - Adjust the time for the display to go black Transparent - Adjust the menu's transparency against the background image

Function

Reset - Reset the settings to default Display Ratio - 16:9 - similar to the screen's default setting, does not stretch image Auto 4:3 - compresses image to 4:3 - does not cut off the image! See below for 4:3 ratio

Sleep - this will completely shut off the screen at the end of the set time (0-120 minutes) Blue Screen - On/Off - This changes the color of the screen on start up when you choose your input Sharpness - Adjust the sharpness from 0 to 100



This is our fanciest driver board. It's best for supporting high resolutions, has multiple inputs, and can support HDMI audio! That means you can have a full A/V system with only one data cable. There's a stereo amplifier onboard that can driver 4 ohm speakers directly You can solder 3W 4 ohm speakers directly to the amp, like this one. (http://adafru.it/dU0) Or use this ready-to-go stereo speaker set, you can just plug the connector in directly! (http://adafru.it/1669)


How to enter Upgrade mode

powered off the board , simply press and hold the POWER key, The board will turn on a Blink LED and will stay on Upgrade mode, connect the USB OTG cable to your PC

Personal tools