HDMI/VGA/AV RTD2660H Video Converter Board
(→How to enter Upgrade mode) |
|||
Line 67: | Line 67: | ||
powered off the board , simply press and hold the '''POWER''' key, The board will turn on a Blink LED and will stay on Upgrade mode, connect the Micro USB cable to your PC. the computer recognize two USB device, call '''Video''', '''USB Touch'''. | powered off the board , simply press and hold the '''POWER''' key, The board will turn on a Blink LED and will stay on Upgrade mode, connect the Micro USB cable to your PC. the computer recognize two USB device, call '''Video''', '''USB Touch'''. | ||
− | '''Video''' - video firmware for upgrade, vedio LVDS firmware and vedio TTL firmware cannot be working simultaneously, which means only one firmware can be selected at a time. Firmware download from [http://www.haoyuelectronics.com/service/RTD2660H Driver Board here]. | + | '''Video''' - video firmware for upgrade, vedio LVDS firmware and vedio TTL firmware cannot be working simultaneously, which means only one firmware can be selected at a time. Firmware download from [http://www.haoyuelectronics.com/service/RTD2660H-Driver-Board here]. |
− | '''USB Touch''' - USB HID protocol for touch control ( capacitive touch ), different firmware, support for different LCD modules. Firmware download from [http://www.haoyuelectronics.com/service/RTD2660H Driver Board here]. | + | '''USB Touch''' - USB HID protocol for touch control ( capacitive touch ), different firmware, support for different LCD modules. Firmware download from [http://www.haoyuelectronics.com/service/RTD2660H-Driver-Board here]. |
Revision as of 09:04, 17 March 2016
Contents |
RTD2660H Driver Board
This is display driver board. It has multiple inputs and works well with both TTL and LVDS screens. This driver even has HDMI audio support and can drive two 4 ohm speakers directly. This driver has a scaler built in. That means you can use it to drive an 800x480 display but set the computer to output 1280x800 and it will scale the display down. However, the image will be stretched out (distorted) if the aspect ratio of the scaler doesn't match up. For example, if you have an 800x480 display, the aspect ratio is 1.6 so 1280x720 would look stretched out (1.77 ratio) but 1280x800 would probably look OK (1.66 ratio).
Menu Options
Each driver board comes with a few menues of customizable settings. We go through each below, with some helpful pictures, to show you what you're able to easily control!
The keypad buttons help you navigate the display menus and sub-menus. As shown in the picture above:
Source key, When you first start up, you can use the key to select the input source!
Right key is Volume add, when click source key, right key is DOWN
Right key is Volume reduce,when click source key, left key is UP
Menu key is SELECT (brings you to the next menu or option)
when use Menu key, Source key is BACK
Power key, you can open or down the display
Color Menu
Brightness - Adjust the brightness
Contrast - Adjust the contrast
Saturation - Adjust the saturation
OSD - On-screen Display
Language - There are a full range of language options for your display. They are:
English, French, Italian, Mandarin, Cantonese, German, Spanish, Japanese, Korean, and Russian
H Position - Horizontal Position
V Position - Vertical Position
OSD Timeout - Adjust the time for the display to go black
Transparent - Adjust the menu's transparency against the background image
Function
Reset - Reset the settings to default
Display Ratio -
16:9 - similar to the screen's default setting, does not stretch image
Auto
4:3 - compresses image to 4:3 - does not cut off the image! See below for 4:3 ratio
Sleep - this will completely shut off the screen at the end of the set time (0-120 minutes)
Blue Screen - On/Off - This changes the color of the screen on start up when you choose your input
Sharpness - Adjust the sharpness from 0 to 100
How to enter Upgrade mode
powered off the board , simply press and hold the POWER key, The board will turn on a Blink LED and will stay on Upgrade mode, connect the Micro USB cable to your PC. the computer recognize two USB device, call Video, USB Touch.
Video - video firmware for upgrade, vedio LVDS firmware and vedio TTL firmware cannot be working simultaneously, which means only one firmware can be selected at a time. Firmware download from here.
USB Touch - USB HID protocol for touch control ( capacitive touch ), different firmware, support for different LCD modules. Firmware download from here.