View source for ADB shell with RK3066

You need to add those Udev rules in order to obtain an ADB shell on your RK3066/RK3188 device:

* Log in as root, and list the content of your USB bus with "lsusb", you should see a device with a device ID starting by "2207", the USB VendorID of Rockchip:
<pre>
$ lsusb
Bus 002 Device 023: ID 2207:0010
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
</pre>
In this case, the description of the device (a Vido N70 tablet in this case) was left empty.
* Download and install the Android SDK. Or, alternatively, just download adb from an Ubuntu Linux with this command:
   sudo apt-get install android-tools-adb
* Log in as root and create the file "/etc/udev/rules.d/51-android.rules" with the following content:
<pre>
SUBSYSTEM=="usb", ATTR{idVendor}=="2207", MODE="0666", GROUP="plugdev"
</pre>
* As root, restart udev with "udevadm control --reload-rules"
* Log in with your normal unix user, and edit ~/.android/adb_usb.ini, add 0x2207 at the end of the file
* As user, restart the adb server with "adb kill-server; adb start-server"
* As user, you should be able to list your device with "adb devices"
* And finally, get a shell on the device if you have activated "USB Debugging" on Android:
<pre>
$ adb shell
root@android:/ # cat /proc/cpuinfo                                             
Processor       : ARMv7 Processor rev 0 (v7l)
processor       : 0
BogoMIPS        : 1631.46

processor       : 1
BogoMIPS        : 1631.46

Features        : swp half thumb fastmult vfp edsp neon vfpv3 
CPU implementer : 0x41
CPU architecture: 7
CPU variant     : 0x3
CPU part        : 0xc09
CPU revision    : 0

Hardware        : RK30board
Revision        : 0000
Serial          : 0000000000000000
</pre>